Design of square broaches Option 62

Design of square broaches Option 62

GRECHISHNIKOV V. A., CHEMBARISOV N. And.,
SKHIRTLADZE A. G., STUPKO V. B., HISAMUTDINOV R. M., Matveev V. N., sukhinina L. A., LARIONOV D. N.
THE DESIGN OF CUTTING TOOL
Tutorial to perform
course project on discipline
«Cutting tool»

Additional information:

1.The routed workpiece: material – Steel 30

Tensile hardness HB 179
The hole for stretching is treated with a drill;
The diameter of the hole to stretch d0 = 23, 4h12mm
Surface roughness parameter Ra 1,6
Stretching length l = 55mm
2.Machine: horizontal broaching, model 7A510
The pulling force of the machine From=100 kg;
The maximum stroke of the carriage broaching machine Lmax = 1250mm
Cartridge type B (quick-change)
Operating speed range 1.5-25 m / min
The plant status is satisfactory
The broach is fixed in the automatic replacement of the cartridge.
Cartridge type: quick-release
3.The nature of production-large-scale.
4.The length of the broach, permissible for the tool shop and grinding Department, is not more than 1500mm.